Shop Polygroup

Sand Filtration System (W/CP2000-S) Setup


NOTE: The system can also be attached this directly to existing SFS or SFX Filtration systems with 1.50" connections, or by using an adapter for 1.25" connections. Connect this Sand system inline, after the pump, through the sand filter and attach the sand filter hose back onto the return fitting. If the Sand Filter is attached through these systems there is no need to run the original SFS or SFX pump. The Sand filtration pump will run through the system hoses when in use. 

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request